/******************************************************************************
 *
 * Copyright(c) 2007 - 2014 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
/*
 * Public General Config
 */
#define AUTOCONF_INCLUDED

#define RTL871X_MODULE_NAME "8723BU"
#define DRV_NAME "rtl8723bu"

#ifndef CONFIG_RTL8723B
#define CONFIG_RTL8723B
#endif
#define CONFIG_USB_HCI

#define PLATFORM_LINUX


/*
 * Wi-Fi Functions Config
 */
#define CONFIG_80211N_HT
#define CONFIG_RECV_REORDERING_CTRL

//#define CONFIG_IOCTL_CFG80211		// Set from Makefile
#ifdef CONFIG_IOCTL_CFG80211
	/*
	 * Indecate new sta asoc through cfg80211_new_sta
	 * If kernel version >= 3.2 or
	 * version < 3.2 but already apply cfg80211 patch,
	 * RTW_USE_CFG80211_STA_EVENT must be defiend!
	 */
	//#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */
	#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
	//#define CONFIG_DEBUG_CFG80211
	//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
	#define CONFIG_SET_SCAN_DENY_TIMER
#endif

#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
	#define CONFIG_NATIVEAP_MLME
	#ifndef CONFIG_NATIVEAP_MLME
		#define CONFIG_HOSTAPD_MLME
	#endif
	//#define CONFIG_FIND_BEST_CHANNEL
	#define CONFIG_TX_MCAST2UNI	// Support IP multicast->unicast

	//#define CONFIG_AUTO_AP_MODE
#endif

#define CONFIG_P2P
#ifdef CONFIG_P2P
	//Added by Albert 20110812
	//The CONFIG_WFD is for supporting the Wi-Fi display
	#define CONFIG_WFD

	#define CONFIG_P2P_REMOVE_GROUP_INFO

	//#define CONFIG_DBG_P2P
	#define CONFIG_P2P_PS
	//#define CONFIG_P2P_IPS
	#define CONFIG_P2P_OP_CHK_SOCIAL_CH
	#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT  //replace CONFIG_P2P_CHK_INVITE_CH_LIST flag
	#define CONFIG_P2P_INVITE_IOT
#endif

// Added by Kurt 20110511
#ifdef CONFIG_TDLS
	#define CONFIG_TDLS_DRIVER_SETUP
//	#ifndef CONFIG_WFD
//		#define CONFIG_WFD
//	#endif
//	#define CONFIG_TDLS_AUTOSETUP
	#define CONFIG_TDLS_AUTOCHECKALIVE
	#define CONFIG_TDLS_CH_SW		/* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */
#endif

//#define CONFIG_CONCURRENT_MODE	// Set from Makefile
#ifdef CONFIG_CONCURRENT_MODE
	#define CONFIG_TSF_RESET_OFFLOAD			// For 2 PORT TSF SYNC.
	//#define CONFIG_HWPORT_SWAP				// Port0->Sec , Port1 -> Pri
	#define CONFIG_RUNTIME_PORT_SWITCH
	//#define DBG_RUNTIME_PORT_SWITCH
	#define CONFIG_STA_MODE_SCAN_UNDER_AP_MODE

	//#define CONFIG_MULTI_VIR_IFACES //besides primary&secondary interfaces, extend to support more interfaces
#endif // CONFIG_CONCURRENT_MODE

#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME

#define CONFIG_80211D


/*
 * Hareware/Firmware Related Config
 */
//#define CONFIG_ANTENNA_DIVERSITY	// Set from Makefile
//#define SUPPORT_HW_RFOFF_DETECTED

#define CONFIG_LED
#ifdef CONFIG_LED
	#define CONFIG_SW_LED
	#ifdef CONFIG_SW_LED
		//#define CONFIG_LED_HANDLED_BY_CMD_THREAD
	#endif
#endif // CONFIG_LED

#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
	#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif

#define CONFIG_C2H_PACKET_EN

#define CONFIG_RF_GAIN_OFFSET

#define DISABLE_BB_RF	0

#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */

/*
 * Interface Related Config
 */
#define CONFIG_USB_TX_AGGREGATION
#define CONFIG_USB_RX_AGGREGATION

#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface

#define CONFIG_GLOBAL_UI_PID

#define CONFIG_OUT_EP_WIFI_MODE

#define ENABLE_USB_DROP_INCORRECT_OUT

//#define CONFIG_SUPPORT_USB_INT
#ifdef CONFIG_SUPPORT_USB_INT
//#define CONFIG_USB_INTERRUPT_IN_PIPE
#endif

//#define CONFIG_REDUCE_USB_TX_INT	// Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.

/*
 * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
 */
//#define CONFIG_USE_USB_BUFFER_ALLOC_TX	// Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
//#define CONFIG_USE_USB_BUFFER_ALLOC_RX	// For RX path

/*
 * USB VENDOR REQ BUFFER ALLOCATION METHOD
 * if not set we'll use function local variable (stack memory)
 */
//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY
//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ


/*
 * Others
 */
#define CONFIG_SKB_COPY	//for amsdu

//#define CONFIG_EASY_REPLACEMENT

//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general...

//#define CONFIG_RESUME_IN_WORKQUEUE

//#define CONFIG_SET_SCAN_DENY_TIMER

#define CONFIG_NEW_SIGNAL_STAT_PROCESS

//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
//#define CONFIG_BACKGROUND_NOISE_MONITOR
#endif

//#define CONFIG_CHECK_AC_LIFETIME	// Check packet lifetime of 4 ACs.

#define CONFIG_EMBEDDED_FWIMG
//#define CONFIG_FILE_FWIMG

#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR


/*
 * Auto Config Section
 */
#ifdef CONFIG_MINIMAL_MEMORY_USAGE
	#undef CONFIG_USB_TX_AGGREGATION
	#undef CONFIG_USB_RX_AGGREGATION
#endif

#ifdef CONFIG_MP_INCLUDED
	#define MP_DRIVER	1
	#define CONFIG_MP_IWPRIV_SUPPORT
	//#undef CONFIG_USB_TX_AGGREGATION
	//#undef CONFIG_USB_RX_AGGREGATION
#else // !CONFIG_MP_INCLUDED
	#define MP_DRIVER	0
#endif // !CONFIG_MP_INCLUDED

#ifdef CONFIG_POWER_SAVING
	#define CONFIG_IPS
	#define CONFIG_LPS

	#ifdef CONFIG_IPS
	//#define CONFIG_IPS_LEVEL_2	1 //enable this to set default IPS mode to IPS_LEVEL_2
	#endif

	#if defined(CONFIG_LPS) && defined(CONFIG_SUPPORT_USB_INT)
		//#define CONFIG_LPS_LCLK
	#endif

	#ifdef CONFIG_LPS_LCLK
		#define CONFIG_XMIT_THREAD_MODE
	#endif
#endif // CONFIG_POWER_SAVING

#ifdef CONFIG_BT_COEXIST
	// for ODM and outsrc BT-Coex
	#define BT_30_SUPPORT 1

	#ifndef CONFIG_LPS
		#define CONFIG_LPS	// download reserved page to FW
	#endif

	#ifndef CONFIG_C2H_PACKET_EN
		#define CONFIG_C2H_PACKET_EN
	#endif
#else // !CONFIG_BT_COEXIST
	#define BT_30_SUPPORT 0
#endif // !CONFIG_BT_COEXIST

#ifdef CONFIG_WOWLAN
	//#define CONFIG_GTK_OL
#endif // CONFIG_WOWLAN

#ifdef CONFIG_GPIO_WAKEUP
	#ifndef WAKEUP_GPIO_IDX
		#define WAKEUP_GPIO_IDX	14	// WIFI Chip Side
	#endif // !WAKEUP_GPIO_IDX
#endif // CONFIG_GPIO_WAKEUP

#ifdef CONFIG_AP_MODE
	//#define CONFIG_INTERRUPT_BASED_TXBCN // Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs
	#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
		#undef CONFIG_INTERRUPT_BASED_TXBCN
	#endif
	#ifdef CONFIG_INTERRUPT_BASED_TXBCN
		//#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
		#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
	#endif
#endif // CONFIG_AP_MODE

#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX

#else
	#define CONFIG_PREALLOC_RECV_SKB
	#ifdef CONFIG_PREALLOC_RECV_SKB
		//#define CONFIG_FIX_NR_BULKIN_BUFFER /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
	#endif
#endif

#ifdef CONFIG_USB_TX_AGGREGATION
//#define CONFIG_TX_EARLY_MODE
#endif

#ifdef CONFIG_TX_EARLY_MODE
#define RTL8723B_EARLY_MODE_PKT_NUM_10	0
#endif


/*
 * Outsource  Related Config
 */

#define TESTCHIP_SUPPORT				0
 
#define RTL8188E_SUPPORT				0
#define RTL8812A_SUPPORT				0
#define RTL8821A_SUPPORT				0
#define RTL8723B_SUPPORT				1
#define RTL8192E_SUPPORT				0
#define RTL8814A_SUPPORT				0
#define 	RTL8195A_SUPPORT				0

#define RATE_ADAPTIVE_SUPPORT			0
#define POWER_TRAINING_ACTIVE			0

#ifdef CONFIG_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif


/*
 * Debug Related Config
 */
//#define CONFIG_DEBUG /* DBG_871X, etc... */

#ifdef CONFIG_DEBUG
#define DBG	1	// for ODM & BTCOEX debug
//#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */
#else // !CONFIG_DEBUG
#define DBG	0	// for ODM & BTCOEX debug
#endif // !CONFIG_DEBUG

#define CONFIG_PROC_DEBUG

//#define DBG_CONFIG_ERROR_DETECT
//#define DBG_CONFIG_ERROR_DETECT_INT
//#define DBG_CONFIG_ERROR_RESET

//#define DBG_IO
//#define DBG_DELAY_OS
//#define DBG_MEM_ALLOC
//#define DBG_IOCTL

//#define DBG_TX
//#define DBG_XMIT_BUF
//#define DBG_XMIT_BUF_EXT
//#define DBG_TX_DROP_FRAME

//#define DBG_RX_DROP_FRAME
//#define DBG_RX_SEQ
//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "rtw-ap"


//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
//#define DBG_ROAMING_TEST

//#define DBG_HAL_INIT_PROFILING

//#define DBG_MEMORY_LEAK	1

